Belt line operation and technical parameters

Belt line operation and technical parameters

Belt line operation and technical parameters

Run in the belt line, the first to confirm the belt line equipment, personnel, transport goods are in good condition and safety; then check the moving parts of the normal foreign body, check all the electric circuit is normal, normal to the belt line put into operation. This paper introduces the operation and technical parameters of belt line.

First, the operation of the belt line

Run on the belt line, the first to confirm the belt line equipment, personnel, transport goods are in good condition and safety; then check the moving parts of the normal foreign body, check all the electric circuit is normal, normal to the belt line put into operation. Finally, to check the difference between the supply voltage and the rated voltage of the equipment shall not exceed 5%. The operation of the belt line inputs must be performed as follows:

1 turn on the power switch, check whether the power supply is normal and the power indicator light is on. After the normal operation of the next step.

2 turn on the power switch of each circuit to check whether it is normal. Normal condition: equipment not action, belt line operation indicator light does not shine, inverter and other equipment power source indicator, inverter display normal (no fault code display).

3 according to the technological process in order to start the electrical equipment, electrical equipment on a normal start after (motor or other equipment has reached the normal velocity, normal state) and electrical equipment under a start.

Run on the belt line, shall abide by the provisions of articles by conveying articles, design ability to comply with the belt line. Second, pay attention to all kinds of personnel shall not exercise part touching the belt line, non professional personnel shall not contact with electrical components, control buttons etc.. Finally, can not run in the belt line on the frequency after the circuit breaker, such as determining the maintenance needs, it must be in the stop frequency operation condition can be, otherwise it might damage the inverter. Belt line stops, press the stop button to stop the system before the total power can be cut off.

Two, the technical parameters of the belt line

Transportation has the advantages of simple structure, convenient maintenance, beautiful appearance, reliable operation, and is widely used in electronics, electrical appliances, food, automobile and motorcycle industry parts assembly. Its technical parameters are as follows:

The 1 main transportation form: bar table, independent working table, unilateral bench, table and table without bilateral transfer form.

2 drive in the form of: motor drive transport form.

3 belt width: 20 ~ 2000mm, can also be customized according to customer requirements.

4 conveyor belt material: rubber belt, PVC belt, canvas belt, food belt, etc..

5 forms: belt conveyor belt conveyor belt, with baffle plate, flat belt andskidproofbelt.

The 6 table size according to user set.

7 the working table is: stick fireproof board, ordinary rubber, anti-static rubber lamp.

8 line bracket: stainless steel, aluminum, carbon steel.

9 transmission speed is 0.1 ~ 10M/min; also can according to user need for speed or speed.

10 speed control: frequency control, electromagnetic speed, electronic speed control, mechanical speed, etc..

11 belt rack material: carbon steel, stainless steel, aluminum profiles.